Alpine S-W10D2 Car Audio Type S Series Dual 2 Ohm 1200W Peak 10″ Subwoofer with Harmony Audio HA-A400.1 Class D Mono 800W SubAmplifier and Rhino-Coated Standard Universal Single 10″ Sub Box Enclosure

This Package Includes :

• 1 x Universal Regular Standard Truck Cab Single 10" Sub Box Enclosure - Rhino Coated
• 1 x Alpine S-W10D2 Car Audio Type S Series Sub Dual 2 Ohm 1200W Peak 10" Subwoofer
• 1 x Harmony Audio HA-A400.1 Car Class D Amp Mono 800W Sub Amplifier w/ Bass Remote
• 1 x Harmony Audio HA-AK8 Car Stereo 8 Gauge 900W Amp Amplifier Install Kit - Nickel

Universal Regular Standard Truck Cab Single 10" Sub Box Enclosure - Rhino Coated :

• Single 10" Truck Sub Box
• Mounting Depth: 5-5/16"
• Air Space: 0.80 Cubic Feet
• Sealed Enclosure
• Dimensions: Width 20" x Height 15" x Depth One 5" x Depth Two 7-1/2"
• Designed to fit behind the seat most trucks
• Constructed with High Quality MDF
• High Quality Binding Terminal Cup (Accepts Banana Terminal Plugs OR Bare Wire 'up to 10GA')
• Sprayed on layers for a long lasting, durable, water resistant enclosure (same technology as spray-on bed liner)

Alpine S-W10D2 Car Audio Type S Series Sub Dual 2 Ohm 1200W Peak 10" Subwoofer:

• 10" 2 ohm S-Series (Type-S) Subwoofer
• Power Handling:
• Peak: 1800 watts
• RMS: 600 watts
• Recommended power range: 250- 600W RMS
• Pulp/Kevlar Cone
• High Amplitude Multi-Roll (HAMR) Surround
• Progressive Spider with Reinforced Layer Tinsel Leads
• Airflow Optimized Dual Flare Pole Vent
• High Strength Steel Frame Basket
• 8 AWG Push Terminals with VC Configuration Jumpers
• Dual Voice Coil
• High Grade Strontium Ferrite Magnets
• Top-mount depth: 4-11/16"
• Cutout diameter: 8-13/16
• Frequency Response: 26- 200Hz
• Sensitivity: 86.4dB
• Resonance Frequency (Fs): 33 Hz
• Authorized Internet Dealer
• 1-year Manufacturer's Warranty
• NOTE: This product can only ship to addresses within the USA and it's territories

Harmony Audio HA-A400.1 Car Class D Amp Mono 800W Sub Amplifier w/ Bass Remote :

• Includes Remote Bass Control Knob with Power Indicator LED
• Includes HA-EASY Speaker Wire to RCA Adapter to Simplify Installation
• Compatible with both Aftermarket and Factory Source with DC Offset Feature
• When DC Offset Feature is used Remote Terminal becomes a 12V Output to Turn On Another Device
• Brushed Aluminum Case with Light Up Blue LED Harmony Logo
• Power and Protection Lights to Easily See Amp Status
• Specifications :
• Alloy Series Mono - 1 Channel Class D Amplifier
• Power Handling:
  • 14.4V @ 1 Ohm
    • 400 Watts RMS x 1
    • 800 Watts PEAK x 1
  • 14.4V @ 2 Ohm
    • 300 Watts RMS x 1
    • 600 Watts PEAK x 1
• Frequency Response: 10Hz-180Hz
• Signal to Noise Ratio: 95dB, A-weighted
• RCAs: Input and Full Pass Through Audio Output
• Turn On: DC Offset or 12V Remote
• Recommended External Fuse: 50A
• Recommended Wiring Power Gauge: 4 Gauge
• Dimensions: 9-3/16" Length x 6-1/8" Width x 2" Height
• User Adjustable Settings :
• Input Type: High or Low Level Signal (Selectable Switch)
  • High Level Input Sensitivity: 2.5V - 40V
  • Low Level Input Sensitivity: 90mV - 10V
• Gain: (Knob Variable)
• Low Pass Filter: 40Hz - 180Hz (Knob Variable)
• Subsonic Filter: 0Hz - 50Hz (Knob Variable)
• Frequency: 30Hz - 80Hz (Knob Variable)
• Bass Boost: 0dB - 12dB @ 50Hz (Knob Variable)

Harmony Audio HA-AK8 Car Stereo 8 Gauge 900W Amp Amplifier Install Kit - Nickel :

• 17FT Flexible Matte Blue 8GA Power Cable
• 3FT Flexible Matte Black 8GA Power Cable
• 20FT Flexible Matte Blue 16GA Speaker Wire
• 17FT Flexible Matte Gray & Black RCA Cable
• 17FT Flexible Matte Blue Remote Wire
• 6FT Split Loom
• Mini ANL Fuse Holder
• 80 Amp Mini ANL Fuse
• (2) 8GA Blue & Black 5/16" Ring Terminals
• (2) 8GA Blue & Black Spade Terminals
• (5) 16GA Blue & Black Spade Terminals
• (4) Pan Head Screws
• (10) Wire Ties