Kicker Truck Audio PSICRE07 Soundgate Powerstage Upgrade Sub Sytem for Select 2007-Up Chevy Silverado & GMC Sierra Crew Cab Pickups (w/o Bose Systems) -Refurbished

Transform your Factory Sound System
You've got a great set of wheels, but something's missing: the sound of the GM factory radio leaves a lot to be desired. Low power, less-then-ideal speaker placement, and dialed-back bass all contribute to the unhappy situation. This Soundgate Powerstage system upgrade by Kicker will transform your Silverado or Sierra's stock radio and speakers into a high-fidelity sound system capable of giving you full, accurate, and richly-textured musical pleasure. And it does it without changing the look of your truck's interior or dash. Substage?äó for the Silverado / Sierra mounts under the rear seat.

Pre-Cut Wiring
The heart of the system is the Powerstage processor/amp module that plugs in between your car's stock receiver and speakers with the help of a GM-specific wiring harness. Kicker's technicians measured the acoustics of the truck's interior, then developed a program to get the strongest and cleanest audio performance possible from the stock speakers. The Powerstage module breathes new life into your vehicle's factory system, automatically correcting for the limitations of the factory speakers, then adding plenty of power so the speakers can sound their best.

Kicker Subwoofer Bass
It wouldn't be a sonic upgrade without a subwoofer to bring bass magic to the mix. Kicker includes a custom-fit, powered subwoofer that mounts under the right rear seat. A 200-watt amplifier provides the power you need to feel the bass from the 10" sub in the front seat.

Easy Installation
This Soundgate upgrade package comes with all the hardware and brackets you'll need, and all the wiring is pre-cut and terminated to help make the installation easier. Step-by-step, illustrated instructions make this sonic upgrade a fun and rewarding project.

Overview: Kicker's SoundGate PowerStage factory audio upgrade kits are designed to fit in specific year/make/model vehicles. The PSICRE07 is compatible with select 2007 and later GM crew cab pickups. Included with the system are a 10" subwoofer in a custom enclosure, subwoofer amp, multi-channel amp with custom mounting brackets, all the necessary cables to power both amplifiers, and adapter plugs to connect to the factory radio and speakers without cutting into any of the factory wiring.

Multi-Channel Amplifier: The multi-channel amplifier is rated at 50 watts RMS x 4 channels and powers the front and rear factory speakers. The amp also has a built-in computer-optimized, 32-bit DSP (Digital Signal Processor) programmed specifically for the truck's interior and factory audio system. Custom brackets are bolted to the amp to mount it out of sight, by the steering column. The included wiring harness has adapter plugs that connect between the factory radio and factory harness, so cutting/splicing/testing the existing wires is not necessary. The included power harness is connected to an accessory lug in the engine compartment, and specific wire routing instructions are included.

Subwoofer: The single 10" Kicker subwoofer is loaded in a custom enclosure and powered by a 200-watt amplifier mounted to the enclosure. The included wiring harness has an adapter plug that connects to the multi-channel amp's harness (for subwoofer signal input) and the power cable is connected to the accessory lug in the engine compartment. Specific wire routing instructions are included. The subwoofer is mounted under the rear seat on the passenger's side.

Electrical System: Both amplifiers are designed to have minimum impact on the truck's charging system.