Kicker 44CVX152 Car Audio CompVX Dual 2 Ohm 15″ Sub, 46CXA12001 Car Audio Class D Mono 2400W Peak Sub Amp CXA1200.1 and SOLORND2X15V Dual 15″ Slot Vented Paintable Baffle Stereo Sub Box Enclosure
Check out our Kicker car audio packages that take the guess work out of trying to figure which products match up together and you get a great price at the same time! We have a huge range of Kicker packages to choose from in everything from amplifiers to car audio batteries. All packages have limited stock and will only be available until we sell out so be sure to act fast before they are gone.
Also Included: | ||
Service & Materials: | Value: | You Pay: |
Speaker Wire: | $15.00 | $0.00 |
Spade Terminals: | $5.00 | $0.00 |
Subwoofer Installation*: | $45.00 | $0.00 |
Shipping & Insurance**: | $45.00 | $0.00 |
Totals: | $100.00 | $0.00 |
*Price based on average 1-hour minimum labor rate. **Price based on 80 lb shipping weight. |
This Package Includes the Following Items:
- 4 x Harmony Audio 3" Wood Build Screws - Quantity 4
- 1 x 8 Packaging Corner Guards
- 2 x Harmony Audio 24" Wire with .205" Spade and Soldered End
- 1 x Car Audio Dual 15" Slot Vented Paintable Baffle Stereo Sub Box Enclosure
- 2 x Kicker CVX15 Car Audio CompVX Subwoofer Dual 2 Ohm 15" Sub 44CVX152 Brand New
- 1 x Kicker 46CXA12001 Car Audio Class D Amp Mono 2400W Peak Sub Amplifier CXA1200.1
- 1 x Harmony Audio HA-AK0 Car Stereo Complete 1/0 Gauge 3000W Amp Amplifier Install Kit - Nickel
Harmony Audio 3" Wood Build Screws - Quantity 4:
Car Audio Dual 15" Slot Vented Paintable Baffle Stereo Sub Box Enclosure:
Features:- Dual 15" Vented Sub Box Enclosure
- Mounting Depth: 10"
- Air Space: 3.0 Cubic Feet Per Sub
- Vented Enclosure
- Dimensions: Width 40" x Height 18" x Depth 19-1/2"
- Constructed with High Quality MDF
- (2) High Quality Binding Terminal Cups (Accepts Banana Terminal Plugs OR Bare Wire 'up to 10GA')
- High Quality Black Carpet
- Removable Paint-able Face for a Custom Look
Kicker CVX15 Car Audio CompVX Subwoofer Dual 2 Ohm 15" Sub 44CVX152 Brand New:
Features:
- Thick Polypropylene Cone
- Signature Double Blue Surround Stitching
- Ribbed Santoprene???? Surround
- SoloKon Cone Reinforcement
- Oversized Suspension System
- High-Strength Insulated Tinsel Leads
- High Temp Voice Coil
- Perimeter Venting for Thermal Management
- Massive Ceramic Magnet
- UniPlate Extended Pole Piece & Backplate For Superior Heat Dissipation
- Cast Aluminum Basket
- Satin Nickel Spring-Loaded Speaker Terminals
Specifications:
- Power Handling
- 1000 Watts RMS
- 2000 Watts Peak
- Impedance: Dual 2 Ohm
- Sensitivity: 91.6 dB
- Frequency Response: 18-500 Hz
- Mounting Depth: 8-1/2"
- Mounting Cutout: 13-13/16"
Sub Box Recommendations:
- Minimum Sealed: 1.8 Cubic Feet
- Maximum Sealed: 5.2 Cubic Feet
- Minimum Vented: 3.0 Cubic Feet
- Maximum Sealed: 5.0 Cubic Feet
Kicker 46CXA12001 Car Audio Class D Amp Mono 2400W Peak Sub Amplifier CXA1200.1:
Features
- Efficient Class-D amplifier - 1 Ohm Stable
- Three-second turn-on/off delay to eliminate unwanted interference
- Variable 12dB crossovers provides control to dial in perfect sound
- KickEQ 6dB variable bass boost for those additional low frequencies
- 24dB subsonic filter for protection from potentially damaging frequencies
- FIT+ (Fail-safe Integration Technology-PLUS) means it works with nearly every radio
- Accepts up to 40-volt input signal
- Small footprint for easier installation
- Vertical mounting hardware included for another unique look
Specifications
- Power Handling:
- 1200 Watts x 1 @ 2 Ohm RMS
- 2400 Watts x 1 @ 2 Ohm PEAK
- 1200 Watts x 1 @ 1 Ohm RMS
- 2400 Watts x 1 @ 1 Ohm PEAK
- Frequency Response: 25Hz - 200Hz
- Signal to Noise Ratio: 95dB
- Input Sensitivity:
- High level 250mV-10V
- Low level 125mV-5V
- Active Crossover: 12dB/octave, variable 50-200Hz, low pass only
- Subsonic Filter: 24dB/octave high-pass fixed @ 25Hz
- Kicker EQ Boost: Variable to +12dB, centered @ 40Hz
- Bass Remote Compatible: CXRC (Not Included)
- Dimensions: 12" Length x 2-3/8" Height x 7-3/16" Width
Harmony Audio HA-AK0 Car Stereo Complete 1/0 Gauge 3000W Amp Amplifier Install Kit - Nickel:
Specifications:
- 17FT Flexible Matte Blue 1/0GA Power Cable
- 3FT Flexible Matte Black 1/0GA Power Cable
- 20FT Flexible Matte Blue 16GA Speaker Wire
- 17FT Flexible Matte Gray & Black RCA Cable
- 17FT Flexible Matte Blue Remote Wire
- 6FT Split Loom
- ANL Fuse Holder
- 250 Amp ANL Fuse
- (2) 1/0GA Blue & Black 5/16" Ring Terminals
- (2) 1/0GA Blue & Black Spade Terminals
- (5) 16GA Blue & Black Spade Terminals
- (4) Pan Head Screws
- (10) Wire Ties

WARNING: This product can expose you to chemicals which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Return Policy
You may return this item un-opened and in its original condition within 30-Days for a refund, minus a 20% restocking fee, and minus any shipping charges we paid to get the item to you.