Kicker 44L7S152 15″ Subwoofers with Sealed Sub Box, 43CXA18001 Amp & Wire Kit
Are you ready for the massive power of Kicker L7S system? The Solo-Baric revolves around KICKER's most advanced cone design, the injection-molded SoloKon. The 360-degree, constant-contact back bracing adheres directly to every contour of the square cone, adding targeted strength, reliable performance and accurate response for the super-clean bass you've been looking for. And with our Subwoofer Packages you get everything you need to get going at an amazing price!
This Package Includes:
- 2 x Kicker 44L7S152 Car Audio Solobaric 15" Car Audio DVC 2 Ohm Sub - Factory Refurbished
- 1 x Square Sealed Dual 15" Subwoofer Enclosure
- 1 x Kicker 43CXA18001 Mono Amp CX Series CXA1800.1 Class D 1800-Watt Car Audio Subwoofer Amplifier - Factory Refurbished
- 1 x Harmony Audio HA-AK4 Car Stereo Complete 4 Gauge 1800W Amp Amplifier Install Kit
Subwoofer Specfications:
- Power Handling
- 1000 Watts RMS
- 2000 Watts Peak
- Impedance: Dual 2 Ohm
- Sensitivity: 89.4 dB
- Frequency Response: 18-100 Hz
- Mounting Depth: 8-11/16"
- Mounting Cutout: 13-3/4"
- Injection-Molded Polypropylene Cone
- Patented Corner Ribs Minimize Distortion
- SoloKone 360-Degree Back Bracing
- Ribbed Santoprene Surround With Blue Surround Stitching
- UniPlatee Black Plate And Pole Piece, Plus Perimeter Venting For Excellent Thermal Management
- Thick Tinsel Leads
- Large Ceramic Magnet
- Cast Aluminum Basket
- Satin-Nickel Plated, Spring-Loaded Speaker Terminals
Amplifier Specfications:
- Kicker CX Series CXA1800.1
- Class-D 2-Ohm Stable Monoblock Amplifier
- RMS Power Rating:
- 4 ohms: 900 watts x 1 chan.
- 2 ohms: 1800 watts x 1 chan.
- Total power output: 3600 watts
- Pulse Width Modulated MOSFET power supply
- Kicker CXARC wired remote bass level control available and sold separately
- LED power (green) and protect (red) indicators
- Soft start turn-on
- Mono channel operation
- Speaker-level (high-level) inputs via RCA
- Requires Kicker KISL, available and sold separately
- Preamp RCA outputs to daisy chain multiple amps
- 3-way protection circuitry (thermal, overload, and speaker short protection)
- Dual speaker terminals simplify the hookup of multiple speakers
- Input sensitivity:
- Low level: 125mV-5V
- High level: 250mV-10V
- Frequency Response: 25 - 200Hz
- Signal to Noise Ration: 95dB
- Variable Low-Pass Crossover: 50 - 200Hz 12dB/octave
- Variable Bass Boost: 0 to +12 dB bass boost at 40 Hz
- Fixed Subsonic Filter @ 25hz, 24db/octave
- 1/0 gauge power and ground wiring is recommended for installation
- Dimensions: 7-3/16"Wx 13-5/8"Lx 2-3/8"H
Install Kit Specfications:
- 17FT Flexible Matte Blue 4GA Power Cable
- 3FT Flexible Matte Black 4GA Power Cable
- 20FT Flexible Matte Blue 16GA Speaker Wire
- 17FT Flexible Matte Gray and Black RCA Cable
- 17FT Flexible Matte Blue Remote Wire
- 6FT Split Loom
- ANL Fuse Holder
- 150 Amp ANL Fuse
- (2) 4GA Blue and Black 5/16" Ring Terminals
- (2) 4GA Blue and Black Spade Terminals
- (5) 16GA Blue and Black Spade Terminals
- (4) Pan Head Screws
- (10) Wire Ties
WARNING: This product can expose you to chemicals including Diisononyl phthalate which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
