Kicker 44L7S82 Car Audio Solo-Baric 8″ Subwoofer Square L7 Dual 2 Ohm Includes Harmony HA-A400.1 Mono Amplifier
The KICKER Solo-Baric L7S features next-level materials and heat management technology for clear, pounding bass that lasts.
The Solo-Baric L7S's square sub design delivers dependable bass - even when pushed to the limit. Dual voice coils with high-temp copper windings easily handle intense heat and power levels for clean, clear bass anytime.
Includes Harmony Audio HA-A400.1 Car Stereo Class D Mono Channel 800 Watt Subwoofer Amplifier - 1 Ohm Stable - Includes Bass Remote
Includes Harmony Audio HA-A400.1 Car Stereo Class D Mono Channel 800 Watt Subwoofer Amplifier - 1 Ohm Stable - Includes Bass Remote
Kicker 44L7S82 8" Subwoofer Specifications:
- Injection-Molded Polypropylene Cone
- Patented Corner Ribs Minimize Distortion
- SoloKon 360-Degree Back Bracing
- Ribbed Santoprene Surround With Blue Surround Stitching
- UniPlate Black Plate And Pole Piece, Plus Perimeter Venting For Excellent Thermal Management
- Thick Tinsel Leads
- Large Ceramic Magnet
- Cast Aluminum Basket
- Satin-Nickel Plated, Spring-Loaded Speaker Terminals
- Power Handling
- 450 Watts RMS
- 900 Watts Peak
- Impedance: Dual 2 Ohm
- Sensitivity: 83.6 dB
- Frequency Response: 28-100 Hz
- Mounting Depth: 4-3/4"
- Mounting Cutout:7-1/4"
Sub Box Recommendations:
- Minimum Sealed: 0.33 Cubic Feet
- Maximum Sealed: 0.75 Cubic Feet
- Minimum Vented: 0.66 Cubic Feet
- Maximum Sealed: 1.00 Cubic Feet
Harmony Audio HA-A400.1 Mono Amplifier Specifications:
- Alloy Series Mono - 1 Channel Class D Amplifier
- Power Handling:
- 14.4V @ 1 Ohm
- 400 Watts RMS x 1
- 800 Watts PEAK x 1
- 14.4V @ 2 Ohm
- 300 Watts RMS x 1
- 600 Watts PEAK x 1
- 14.4V @ 1 Ohm
- Frequency Response: 10Hz-180Hz
- Signal to Noise Ratio: 95dB, A-weighted
- RCAs: Input and Full Pass Through Audio Output
- Turn On: DC Offset or 12V Remote
- Recommended External Fuse: 50A
- Recommended Wiring Power Gauge: 4 Gauge
- Dimensions: 9-3/16" Length x 6-1/8" Width x 2" Height
User Adjustable Settings:
- Input Type: High or Low Level Signal (Selectable Switch)
- High Level Input Sensitivity: 2.5V - 40V
- Low Level Input Sensitivity: 90mV - 10V
- Gain: (Knob Variable)
- Low Pass Filter: 40Hz - 180Hz (Knob Variable)
- Subsonic Filter: 0Hz - 50Hz (Knob Variable)
- Frequency: 30Hz - 80Hz (Knob Variable)
- Bass Boost: 0dB - 12dB @ 50Hz (Knob Variable)
Features:
- Includes Remote Bass Control Knob with Power Indicator LED
- Includes HA-EASY Speaker Wire to RCA Adapter to Simplify Installation
- Compatible with both Aftermarket and Factory Source with DC Offset Feature
- When DC Offset Feature is used Remote Terminal becomes a 12V Output to Turn On Another Device
- Brushed Aluminum Case with Light Up Blue LED Harmony Logo
- Power and Protection Lights to Easily See Amp Status
WARNING: This product can expose you to chemicals including Diisononyl phthalate which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Return Policy
You may return this item in its original condition within 30-Days for a refund, minus a 20% restocking fee, and minus any shipping charges we paid to get the item to you.