HA-A400.4 Car Stereo Alloy 4 Channel 800W Full Range Speaker or Sub Amp, 46FHS Mini ANL AFS 1/0 to 8 Gauge Power Wire Fuse Holder FHS and HA-RCA17 2 Channel 17Ft Twisted Pair RCA Cable
This Package Includes the Following Items:
- 1 x Harmony Audio HA-A400.4 Car Stereo Alloy Amp 4 Channel 800W Full Range Speaker or Sub Amplifier
- 1 x Kicker 46FHS Car Audio Mini ANL AFS 1/0 to 8 Gauge Power Wire Fuse Holder FHS
- 1 x Harmony Audio HA-RCA17 Car Audio 2 Channel Stereo 17 Foot Twisted Pair RCA Cable
- 2 x Kicker 46KISL Car Audio Amp Amplifier Speaker Wire to 2 Channel RCA Adapter KISL
- 2 x Kicker 46BT4 Car Audio Positive - Negative Power Wire Cable Battery Terminal BT4
- 1 x Harmony Audio HA-MAXI100 Car Stereo Fuseholder 3 Pack 100 Amp MAXI Fuses - Nickel
- 1 x Harmony Audio HA-BT2 Car Audio Battery Terminal Pair 2GA - 4GA (2) 8GA Inputs
- 1 x Harmony Audio HA-RT4 Car Stereo Power or Ground 4 Gauge 5/16" Ring Terminal - Nickel
Harmony Audio HA-A400.4 Car Stereo Alloy Amp 4 Channel 800W Full Range Speaker or Sub Amplifier:
Specifications:
- Alloy Series 4 Channel Class D Full Range Amplifier
- Power Handling:
- 14.4V @ 4 Ohm Stereo
- 75 Watts RMS x 4
- 150 Watts PEAK x 4
- 14.4V @ 4 Ohm Bridged
- 200 Watts RMS x 2
- 400 Watts PEAK x 2
- 14.4V @ 2 Ohm Stereo
- 85 Watts RMS x 4
- 170 Watts PEAK x 4
- 14.4V @ 4 Ohm Stereo
- Frequency Response: 10Hz-30kHz
- Signal to Noise Ratio: 95dB, A-weighted
- RCAs: Input
- Turn On: DC Offset or 12V Remote
- Recommended External Fuse: 40A
- Recommended Wiring Power Gauge: 8 Gauge
- Dimensions: 8-5/8" Width x 6-1/8" Width x 2" Height
User Adjustable Settings:
- Front and Rear Selectable Filter: Full, High Pass or Low Pass
- Input Type: High or Low Level Signal (Selectable Switch)
- High Level Input Sensitivity: 2.5V - 40V
- Low Level Input Sensitivity: 90mV - 10V
- Gain: (Knob Variable)
- Low Pass Filter: 50Hz - 500Hz (Knob Variable)
- High Pass Filter: 50Hz - 2kHz (Knob Variable)
- Bass Boost: 0dB - 12dB @ 50Hz (Knob Variable)
Features:
- Includes HA-EASY x 2 Speaker Wire to RCA Adapterto Simplify Installation
- Compatible with both Aftermarket and Factory Source with DC Offset Feature
- When DC Offset Feature is used Remote Terminal becomes a 12V Output to Turn On Another Device
- Brushed Aluminum Case with Light Up Blue LED Harmony Logo
- Power and Protection Light to Easily See Amp Status
Kicker 46FHS Car Audio Mini ANL AFS 1/0 to 8 Gauge Power Wire Fuse Holder FHS:
Features
- AFS, Mini-ANL Fuse Holder with One 1/0-8 Gauge Input and Output
- Brass Construction
- (1) 1/0-8 Gauge in
- (1) 1/0-8 Gauge out
- Small and more Functional
- Versa-Gauge Connection Points
- Wire Receptacles work with most size wire (1/0-8 Gauge or 4-8 Gauge)
- Fuse Type: AFS (Mini ANL)
- Fuse not included
Harmony Audio HA-RCA17 Car Audio 2 Channel Stereo 17 Foot Twisted Pair RCA Cable:
Specifications:
- Car Audio 17 Foot RCA Interconnect Cable
- Ideal for Car or Marine Applications
- Twisted Pair Cable Design Blocks Interference
- Stereo Cable - Left and Right Audio
- Nickel-Plated Connectors for Excellent Signal Transfer
- Compact Connector Design for Easy Installation
Kicker 46KISL Car Audio Amp Amplifier Speaker Wire to 2 Channel RCA Adapter KISL:
Features
- Compatible with Kicker DX, ZX, or IX Series amps or any aftermarket amplifier equipped with RCA inputs that take high-level input signals
- 2 Ft. 2-Channel K Series Speaker Cable to RCA Adapter
- Split-pin RCAs with silver-tinned and OFC wire for superior bass response
- Ergonomic design for slip-free installation
- K-Grip dual-mold connectors offer sure grip
- Unique cable winding patterns improve clarity and ensure consistent timing
- K-Grip line union ultra-slim for snag-free cable routing
- 16 Gauge speaker wire to RCAs and includes female to female adapters
- Cable Length: 2 Ft. (.6m)
- Color: Blue
- NOTE:
- Blue Wire = Positive
- Gray Wire = Negative
Kicker 46BT4 Car Audio Positive - Negative Power Wire Cable Battery Terminal BT4:
Features:
- Brass Construction
- (2) 1/0-4 Gauge out
- (1) 4-8 Gauge out
- No fail battery terminal includes a negative post adapter collar that locks into place for tight grip and best connection
- Versa-Gauge Connection Points
Harmony Audio HA-MAXI100 Car Stereo Fuseholder 3 Pack 100 Amp MAXI Fuses - Nickel:
Specifications:
- MAXI (3) Pack 100 Amp Fuses
- Nickel Plated Finish
- Ultra Conductive
- Universal Design Compatible with any MAXI Fuse Holder
- 100 Amps @ 12 volts = 1200 Max Wattage
- 100 Amps @ 14.4 volts = 1440 Max Wattage
Harmony Audio HA-BT2 Car Audio Battery Terminal Pair 2GA - 4GA (2) 8GA Inputs:
Specifications:
- Battery Terminal Pair Includes Positive & Negative
- (1) 2 Gauge Output
- (1) 4 Gauge Output
- (2) 8 Gauge Outputs
- Nickel Plated Finish
- Hex Set Screw ensures Tight Connection
- Universal - Accepts Any Brand Power Wire
- Ultra Conductive
- Terminals Marked with + & - Symbols
- Corrosion Resistant
Harmony Audio HA-RT4 Car Stereo Power or Ground 4 Gauge 5/16" Ring Terminal - Nickel:
Specifications:
- 4 Gauge Ring Terminal
- Nickel Plated Finish
- Ideal for Power or Ground Cable
- 5/16" Hole Diameter
- Set Screw ensures Tight Connection
- Ultra Conductive

WARNING: This product can expose you to chemicals which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Return Policy
You may return this item in its original condition within 30-Days for a refund, minus a 20% restocking fee, and minus any shipping charges we paid to get the item to you.