Harmony Audio HA-ML182 Competition SPL 18″ Sub Subwoofer & CXA1200.1 Amp Package
This Package Includes the Following Items:
- 1 x Harmony Audio HA-ML182 Monolith 18" Competition Sub 3500W Dual 2 Ohm Subwoofer
- 1 x Kicker 46CXA12001 Car Audio Class D Amp Mono 2400W Peak Sub Amplifier CXA1200.1
- 1 x Harmony Audio HA-AK0 Car Stereo Complete 1/0 Gauge 3000W Amp Amplifier Install Kit - Nickel
Harmony Audio HA-ML182 Monolith 18" Competition Sub 3500W Dual 2 Ohm Subwoofer:
Specifications:
- 18" Monolith Series Car Subwoofer
- Power Handling:
- Peak: 3500 watts
- RMS: 1750 watts
- Sensitivity: 88.4dB
- Frequency Response: 30Hz-300Hz
- Mounting Depth: 12"
- Mounting Cutout Diameter: 16-13/16"
- Min Sealed Box Volume (Cubic Feet): 3.88
- Max Sealed Box Volume (Cubic Feet): 7.24
- Min Vented Box Volume (Cubic Feet): 5.65
- Max Vented Box Volume (Cubic Feet): 7.77
- Magnet Weight: 306 Ounces
- 3" CCAW Voice Coil
- Dual 1 Ohm
Features:
- Competition Grade Paper Cone
- Stitched High Roll Foam Surround
- Tinsel Leads Woven into Spider
- Die-Cast Aluminum Basket
- High Flux Ferrite Magnet
Detailed Specifications:
- Voice Coil Diameter: 76.5mm
- Voice Coil Height: 64.7mm
- HE Magnetic Gap Height: 20mm
- Voice Coil Bobbin: Black Aluminum
- Xmax: 22.35mm
- Magnet Layers: 8
- Cms (Suspension Compliance): 0.041
- Qms (Mechanical Q Factor): 5.33
- Qes (Electrical Q Factor): 0.67
- Qts (Total Q Factor): 0.59
- Mms (Moving Mass): 570.4
- Vas (Equivalent Volume of Compliance): 80.6 L
- Rs (Resonant Frequency): 33 Hz
- SD (Effective Piston Area): 1164.1 cm2
Kicker 46CXA12001 Car Audio Class D Amp Mono 2400W Peak Sub Amplifier CXA1200.1:
Features
- Efficient Class-D amplifier - 1 Ohm Stable
- Three-second turn-on/off delay to eliminate unwanted interference
- Variable 12dB crossovers provides control to dial in perfect sound
- KickEQ 6dB variable bass boost for those additional low frequencies
- 24dB subsonic filter for protection from potentially damaging frequencies
- FIT+ (Fail-safe Integration Technology-PLUS) means it works with nearly every radio
- Accepts up to 40-volt input signal
- Small footprint for easier installation
- Vertical mounting hardware included for another unique look
Specifications
- Power Handling:
- 1200 Watts x 1 @ 2 Ohm RMS
- 2400 Watts x 1 @ 2 Ohm PEAK
- 1200 Watts x 1 @ 1 Ohm RMS
- 2400 Watts x 1 @ 1 Ohm PEAK
- Frequency Response: 25Hz - 200Hz
- Signal to Noise Ratio: 95dB
- Input Sensitivity:
- High level 250mV-10V
- Low level 125mV-5V
- Active Crossover: 12dB/octave, variable 50-200Hz, low pass only
- Subsonic Filter: 24dB/octave high-pass fixed @ 25Hz
- Kicker EQ Boost: Variable to +12dB, centered @ 40Hz
- Bass Remote Compatible: CXRC (Not Included)
- Dimensions: 12" Length x 2-3/8" Height x 7-3/16" Width
Harmony Audio HA-AK0 Car Stereo Complete 1/0 Gauge 3000W Amp Amplifier Install Kit - Nickel:
Specifications:
- 17FT Flexible Matte Blue 1/0GA Power Cable
- 3FT Flexible Matte Black 1/0GA Power Cable
- 20FT Flexible Matte Blue 16GA Speaker Wire
- 17FT Flexible Matte Gray & Black RCA Cable
- 17FT Flexible Matte Blue Remote Wire
- 6FT Split Loom
- ANL Fuse Holder
- 250 Amp ANL Fuse
- (2) 1/0GA Blue & Black 5/16" Ring Terminals
- (2) 1/0GA Blue & Black Spade Terminals
- (5) 16GA Blue & Black Spade Terminals
- (4) Pan Head Screws
- (10) Wire Ties


WARNING: This product can expose you to chemicals which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Return Policy
You may return this item in its original condition within 30-Days for a refund, minus a 20% restocking fee, and minus any shipping charges we paid to get the item to you.