Dual 6.75″ Kicker CompRT Sub Package with Kicker 11DX250.1 Amp
Our subwoofer packages take the guess work out of trying to figure which products match up together and give you a great price at the same time! With our packages you know you're getting a high quality system that it is going to give you the most bang for your buck. Sit back, relax, and let us do the hard work!
- Dual 6.75″ Kicker CompRT Sub Package with Kicker 11DX250.1 Amp
- SKU: CB19-SubPack24
- 2 x Kicker 43CWRT672 6.75" CompRT 150W RMS 2 Ohm DVC Car Subwoofers
- 1 x Kicker Refurbished 11DX250.1 Car Stereo Class D Mono 250W Subwoofer Amplifier - This item is Factory Certified Refurbished
- 1 x Harmony Audio HA-AK10 10 Gauge 600W Amp Amplifier Install Kit
- Size: 6.5"
- Impedance: 2 Ohms DVC
- Power Watts: 300W Peak / 150W RMS
- Sensitivity: 82.6 dB
- DX Series Monoblock Class D Car Amplifier
- RMS Power Rating (14.4V):
- 4 ohms: 140 watts x 1 chan.
- 2 ohms: 250 watts x 1 chan.
- Total RMS power output: 250 watts x 1 chan.
- High efficiency MOSFET power supply
- Remote bass level input (Kicker 10ZXRC remote level control sold separately)
- LED power and protect indicators
- Selectable bass boost (0 or +9 dB at 40 Hz)
- Mono channel operation
- Preamp RCA outputs
- Muting circuit cancels out unwanted noise
- FIT (Fail-Safe Integration Technology) utilizes differential inputs to reject noise and electrical interference for the quietest operation possible and ultimate audio clarity
- Balanced differential inputs for noise elimination and factory-radio compatibility
- Dual input sensitivity differential RCA inputs which receive high or low level signals
- Speaker-level input compatible (switchable) through RCA connection, Kicker 09ZISL required and sold separately
- 3 Automatic turn-on modes (remote, DC offset, signal sense)
- High-density convection heat sink for extreme heat dissipation
- Gold-plated RCA level inputs
- Gold-plated screw terminals
- Input sensitivity:
- Low level: 125mV-5V
- High level: 250mV-10V
- Subsonic Filter: 24dB/octave high-pass fixed @ 25Hz
- CEA-2006 compliant amplifier
- Frequency response: 25-200hz, +0/-1dB
- Dimensions: 10-1/4"L x 8-5/16"W x 2-1/4"H
- Actual power exceeds rated power, documented inside each carton
- 8-gauge power and ground wiring is required for installation.
- 17FT Flexible Matte Blue 10GA Power Cable
- 3FT Flexible Matte Black 10GA Power Cable
- 20FT Flexible Matte Blue 16GA Speaker Wire
- 17FT Flexible Matte Gray & Black RCA Cable
- 17FT Flexible Matte Blue Remote Wire
- 6FT Split Loom
- Mini ANL Fuse Holder
- 60 Amp Mini ANL Fuse
- (2) 10GA Blue & Black 5/16" Ring Terminals
- (2) 10GA Blue & Black Spade Terminals
- (5) 16GA Blue & Black Spade Terminals
- (4) Pan Head Screws
- (10) Wire Ties
- This item is Refurbished
This Package Includes the Following Items:
Kicker CWRT67 Subwoofer Features:
Kicker 11DX250.1 Refurbished Subwoofer Amp Features:
Harmony Audio HA-AK10 Amplifier Kit Features:
Our subwoofer packages take the guess work out of trying to figure which products match up together and give you a great price at the same time! With our packages you know you're getting a high quality system that it is going to give you the most bang for your buck. Sit back, relax, and let us do the hard work!
- Dual 6.75″ Kicker CompRT Sub Package with Kicker 11DX250.1 Amp
- SKU: CB19-SubPack24
- 2 x Kicker 43CWRT672 6.75" CompRT 150W RMS 2 Ohm DVC Car Subwoofers
- 1 x Kicker Refurbished 11DX250.1 Car Stereo Class D Mono 250W Subwoofer Amplifier - This item is Factory Certified Refurbished
- 1 x Harmony Audio HA-AK10 10 Gauge 600W Amp Amplifier Install Kit
- Size: 6.5"
- Impedance: 2 Ohms DVC
- Power Watts: 300W Peak / 150W RMS
- Sensitivity: 82.6 dB
- DX Series Monoblock Class D Car Amplifier
- RMS Power Rating (14.4V):
- 4 ohms: 140 watts x 1 chan.
- 2 ohms: 250 watts x 1 chan.
- Total RMS power output: 250 watts x 1 chan.
- High efficiency MOSFET power supply
- Remote bass level input (Kicker 10ZXRC remote level control sold separately)
- LED power and protect indicators
- Selectable bass boost (0 or +9 dB at 40 Hz)
- Mono channel operation
- Preamp RCA outputs
- Muting circuit cancels out unwanted noise
- FIT (Fail-Safe Integration Technology) utilizes differential inputs to reject noise and electrical interference for the quietest operation possible and ultimate audio clarity
- Balanced differential inputs for noise elimination and factory-radio compatibility
- Dual input sensitivity differential RCA inputs which receive high or low level signals
- Speaker-level input compatible (switchable) through RCA connection, Kicker 09ZISL required and sold separately
- 3 Automatic turn-on modes (remote, DC offset, signal sense)
- High-density convection heat sink for extreme heat dissipation
- Gold-plated RCA level inputs
- Gold-plated screw terminals
- Input sensitivity:
- Low level: 125mV-5V
- High level: 250mV-10V
- Subsonic Filter: 24dB/octave high-pass fixed @ 25Hz
- CEA-2006 compliant amplifier
- Frequency response: 25-200hz, +0/-1dB
- Dimensions: 10-1/4"L x 8-5/16"W x 2-1/4"H
- Actual power exceeds rated power, documented inside each carton
- 8-gauge power and ground wiring is required for installation.
- 17FT Flexible Matte Blue 10GA Power Cable
- 3FT Flexible Matte Black 10GA Power Cable
- 20FT Flexible Matte Blue 16GA Speaker Wire
- 17FT Flexible Matte Gray & Black RCA Cable
- 17FT Flexible Matte Blue Remote Wire
- 6FT Split Loom
- Mini ANL Fuse Holder
- 60 Amp Mini ANL Fuse
- (2) 10GA Blue & Black 5/16" Ring Terminals
- (2) 10GA Blue & Black Spade Terminals
- (5) 16GA Blue & Black Spade Terminals
- (4) Pan Head Screws
- (10) Wire Ties
- This item is Refurbished
This Package Includes the Following Items:
Kicker CWRT67 Subwoofer Features:
Kicker 11DX250.1 Refurbished Subwoofer Amp Features:
Harmony Audio HA-AK10 Amplifier Kit Features: