Alpine SWT-10S4 Car Audio SWT Series Sub Single 4 Ohm 700W Shallow Subwoofer with Harmony Audio HA-A1500.1 Class D Amp Mono 3000W Sub Amplifier w/ Bass Remote and ASC Dual 10″ Subwoofer Box Enclosure

This Bundle Includes the Following :

Specifications:

Alpine SWT-10S4 Car Audio SWT Series Sub Single 4 Ohm 700W Shallow Subwoofer:

• 10" SWT Series Single 4-ohm Shallow Mount Truck Subwoofer
• Power Handling:
  • Peak: 1,000 watts
  • RMS: 350 watts
• Recommended Power Range: 100W - 350W
• Poly-Mica Dust Cap & Pulp-Kevlar
• Polyurethane Foam Surround
• H.A.M.R. Surround Technology
• Spiral Cut Aluminum Former
• 65mm Voice Coil with High-Temp 4-Layer SVC Winding
• 8AWG Push Terminals
• Top-mount depth: 4-3/16"
• Mounting Diameter: 8-15/16''
• Frequency Response: 30 - 200 Hz
• Sensitivity: 84.8 dB
• Subwoofer Specifications:
  • Subwoofer Series: SWT (Alpine)
  • Subwoofer Size: 10"
  • Peak Power Handling: 1000 watts
  • RMS Power Handling: 350 watts
  • Voice Coil(s): Single
  • Impedance (Per Voice Coil): 4 ohms
  • Voice Coil Diameter: 2.55"
  • Frequency Response: 30 - 200 Hz
  • Sensitivity: 85.1 dB
  • Xmax (millimeters): 11 mm
  • Subwoofer Design: Round / Circle
  • Main Cone Color: Black
  • Woofer Composition: Polypropylene-Mica
  • Woofer Surround: Poly-Foam
  • Subwoofer Grille: No
  • Re-Cone Kit Available: No
• NOTE: This product can only ship to addresses within the USA and it's territories

Harmony Audio HA-A1500.1 Car Class D Amp Mono 3000W Sub Amplifier w/ Bass Remote :

• Includes Remote Bass Control Knob with Power Indicator LED
• Includes HA-EASY Speaker Wire to RCA Adapter to Simplify Installation
• Compatible with both Aftermarket and Factory Source with DC Offset Feature
• When DC Offset Feature is used Remote Terminal becomes a 12V Output to Turn On Another Device
• Brushed Aluminum Case with Light Up Blue LED Harmony Logo
• Power and Protection Lights to Easily See Amp Status
• Specifications :
• Alloy Series Mono - 1 Channel Class D Amplifier
• Power Handling:
  • 14.4V @ 1 Ohm
    • 1500 Watts RMS x 1
    • 3000 Watts PEAK x 1
  • 14.4V @ 2 Ohm
    • 1200 Watts RMS x 1
    • 2400 Watts PEAK x 1
• Frequency Response: 10Hz-180Hz
• Signal to Noise Ratio: 95dB, A-weighted
• RCAs: Input and Full Pass Through Audio Output
• Turn On: DC Offset or 12V Remote
• Recommended External Fuse: 200A
• Recommended Wiring Power Gauge: 1/0 Gauge
• Dimensions: 19-5/8" Length x 6-1/8" Width x 2" Height
• User Adjustable Settings:
• Input Type: High or Low Level Signal (Selectable Switch)
  • High Level Input Sensitivity: 2.5V - 40V
  • Low Level Input Sensitivity: 90mV - 10V
• Gain: (Knob Variable)
• Low Pass Filter: 40Hz - 180Hz (Knob Variable)
• Subsonic Filter: 0Hz - 50Hz (Knob Variable)
• Frequency: 30Hz - 80Hz (Knob Variable)
• Bass Boost: 0dB - 12dB @ 50Hz (Knob Variable)

Harmony Audio HA-AK0 Car Stereo 1/0 Gauge 3000W Amp Amplifier Install Kit Nickel :

• 17FT Flexible Matte Blue 1/0GA Power Cable
• 3FT Flexible Matte Black 1/0GA Power Cable
• 20FT Flexible Matte Blue 16GA Speaker Wire
• 17FT Flexible Matte Gray & Black RCA Cable
• 17FT Flexible Matte Blue Remote Wire
• 6FT Split Loom
• ANL Fuse Holder
• 250 Amp ANL Fuse
• (2) 1/0GA Blue & Black 5/16" Ring Terminals
• (2) 1/0GA Blue & Black Spade Terminals
• (5) 16GA Blue & Black Spade Terminals
• (4) Pan Head Screws
• (10) Wire Ties

ASC Compatible with 2019-UP Jeep Gladiator 2X10JEEP-GLAD Dual 10" Subwoofer Box Enclosure:

• ASC 2X10JEEP-GLAD
• Vehicle: Gladiator 2019-Up
• Mounting Depth: 4.5"
• Subwoofer Size: Double 10"
• Cutout Diameter: 9"
• Fitment: Fits in Truck Cab, Under Rear Seat
• Finish: Rugged Black Carpet
• Chambers:Separate Subwoofer Chambers
• Subwoofer Firing Direction: UP-Firing
• MDF Thickness: 5/8? Industrial Grade MDF
• Airspace (Total): 1.02 Cubic Feet
• Volume (Per Subwoofer): 0.50 Cubic Feet