Alpine S-S50 Car Audio Type S Series Speakers 5 1/4″ Coaxial 220W Speaker Pair Bundle with Harmony Audio Sound Dampening Speaker Kit
Description
Alpine S-S50 Car Audio Type S Series Speakers 5 1/4" Coaxial 220W Speaker Pair Bundle with Harmony Audio Sound Dampening Speaker Kit
Specifications
Alpine S-S50 Car Audio Type S Series Speakers 5 1/4" Coaxial 220W Speaker Pair Bundle with Harmony Audio Sound Dampening Speaker Kit
SKU: ALP19-S-S50-HA-SD
This Package Includes the Following Items:
- 1 x Alpine S-S50 Car Audio Type S Series Speakers 5 1/4" Coaxial 220W Speaker Pair
- 1 x Harmony Audio HA-SDSK Car Truck SUV Sound Damping Dampening Deadening (2) Mat 10" x 10" Sheets Speaker Install Kit
Alpine S-S50 Car Audio Type S Series Speakers 5 1/4" Coaxial 220W Speaker Pair:
- 5-1/4" Type S Series 2-Way Car Speakers
- Power Handling:
- Peak: 340 watts per pair / 170 watts each
- RMS: 110 watts per pair / 55 watts each
- Poly-mica cone woofer
- Rubber surround
- 3/4" Silk dome tweeter
- Optimized air-flow design
- Stamped steel basket frame
- Swivel-mount tweeter
- 4 ohms impedance
- Square-wire short voice coil
- Low distortion strontium magnet
- Top-mount depth: 2"
- Priced Per: Pair
- Speaker Size: 5-1/4"
- Design: 2-way
- Tweeter Design: Dome
- Tweeter Composition: Silk
- Woofer Composition: Polymer/Mica Composite
- Woofer Surround: Rubber
- Peak Power Handling: 170 watts
- RMS Power Handling: 55 watts
- Sensitivity: 87 dB
- Frequency Response: 80 - 22000 Hz
- Impedance (Per Voice Coil): 4 ohms
- Shallow Mount Installation: Yes
- Top-Mount Depth: 2"
- Cutout Dimensions: 5-1/16" x 5-1/16"
- Speaker Grilles: Yes
- NOTE: This product can only ship to addresses within the USA and it's territories
Harmony Audio HA-SDSK Car Truck SUV Sound Damping Dampening Deadening (2) Mat 10" x 10" Sheets Speaker Install Kit:
Specifications:
- Speaker Kit Includes 2 Sheets (Each Sheet 10" x 10")
- Black Foil with 70 MIL Rubber Butyl Layer
- Self Adhesive Peel, Stick and Roll Finish
- Heat Resistant up to 200 Degrees
- Eliminates Road Noise, Vibrations and Rattles
Install Tips:
- Remove the speakers from the door panels and clean the metal surface make sure is dry before starting
- Take the 1st sheet and place it with the speaker hole in the center of the sheet, press into place firmly
- Cutout the speaker hole using a razor blade and remove the excess material, cutout holes for mounting screws
- Install the speaker into the mounting hole and secure, then repeat for the opposite door panel
This item is New
1-Year Manufacturer's Warranty
Proposition 65 Warning for California Consumers
WARNING: This product can expose you to chemicals which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Frequently Asked Questions for this Product:
When will my order ship?
Most orders placed before 3:00 PM CST will ship within 24 hours. If you need a product by a specific time please contact us at 1-877-275-4434 before ordering.
When will I receive my tracking number?
Most tracking numbers are sent out around 5:30 PM CST of the following business day. Please allow 24-business-hours after ordering before requesting tracking information.
How fast will I receive my product?
Depending on your location it may take 3-4 business days for your order to arrive. Your tracking number will tell you the exact day your order will arrive. If you need an order by a specific date we recommend you call us at 1-877-275-4434
Return Policy
You may return this item in its original condition within 30-Days for a refund, minus a 20% restocking fee, and minus any shipping charges we paid to get the item to you.