Alpine R2-W10D2 Next Gen 10″ Sub R-Series Dual 2-Ohm 750 RMS Includes HA-A400.1 Mono Amp
The R2-W10D2 10" sub capitalizes on this knowledge with a new motor structure with double-stacked magnets for deeper bass and tighter sound. Its Kevlar-reinforced pulp cone features a durable HAMR Santoprene surround that allows for huge amounts of excursion, and an oversized poly ceramic dust cap supplies rigidity to keep the sound tight. It's the perfect sub for bassheads that want the best of both worlds: accurate response and otherworldly thump. The R2-W10D2 handles up to 750 watts RMS, so it's ready for your high-powered amp. Its dual oversized 2-ohm voice coils allow you to draw maximum power from your mono amp. Since it works well in sealed or ported enclosures you'll enjoy your music the way you like to hear it. Note: If you are wiring this DVC sub for lower impedance, make sure that your amp is compatible.
Includes Harmony Audio HA-A400.1 Car Stereo Class D Amp Mono 800 Watt Subwoofer Amplifier - 1 Ohm Stable - (Includes Bass Remote)
- Dual Voice Coil (DVC) Subwoofers with Configuration Jumpers
- Polypropylene/Ceramic Composite Dust Cap
- Kevlar Reinforced Pulp Cone High-Performance subwoofers
- Twist-Lock Grille Mount System
- High-Amplitude Multi-Roll (H.A.M.R.) Surround
- Large Double-Stacked Magnets
Specifications:
- 750W RMS
- 2250W Peak Power Handling
- Frequency Response: 26Hz-200Hz
- Sensitivity (1W/1m): 82.4dB
- Nominal Impedance: 2 Ohm
- Voice Coil: 65mm
- X-Max: 20mm
- Magnet Weight: 123oz
- Mounting Depth: 6” (152mm)
- Cutout Size: 9-1/16” (231mm)
- Push-Type Speaker Terminals (Up to 8AWG Wire Size)
- CTA-2031 Compliant
- 10” R2-Series DVC Subwoofer with Cosmetic Trim Ring
- 2 Jumper Wires for DVC Configuration
- Owners Manual
HA-A400.1 Mono Amplifier Specifications:
- Alloy Series Mono - 1 Channel Class D Amplifier
- Power Handling:
- 14.4V @ 1 Ohm
- 400 Watts RMS x 1
- 800 Watts PEAK x 1
- 14.4V @ 2 Ohm
- 300 Watts RMS x 1
- 600 Watts PEAK x 1
- 14.4V @ 1 Ohm
- Frequency Response: 10Hz-180Hz
- Signal to Noise Ratio: 95dB, A-weighted
- RCAs: Input and Full Pass Through Audio Output
- Turn On: DC Offset or 12V Remote
- Recommended External Fuse: 50A
- Recommended Wiring Power Gauge: 4 Gauge
- Dimensions: 9-3/16" Length x 6-1/8" Width x 2" Height
- Input Type: High or Low Level Signal (Selectable Switch)
- High Level Input Sensitivity: 2.5V - 40V
- Low Level Input Sensitivity: 90mV - 10V
- Gain: (Knob Variable)
- Low Pass Filter: 40Hz - 180Hz (Knob Variable)
- Subsonic Filter: 0Hz - 50Hz (Knob Variable)
- Frequency: 30Hz - 80Hz (Knob Variable)
- Bass Boost: 0dB - 12dB @ 50Hz (Knob Variable)
Features:
- Includes Remote Bass Control Knob with Power Indicator LED
- Includes HA-EASY Speaker Wire to RCA Adapter to Simplify Installation
- Compatible with both Aftermarket and Factory Source with DC Offset Feature
- When DC Offset Feature is used Remote Terminal becomes a 12V Output to Turn On Another Device
- Brushed Aluminum Case with Light Up Blue LED Harmony Logo
- Power and Protection Lights to Easily See Amp Status
WARNING: This product can expose you to chemicals which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Return Policy
You may return this item in its original condition within 30-Days for a refund, minus a 20% restocking fee, and minus any shipping charges we paid to get the item to you.
