1987-2006 Jeep Wrangler YJ TJ Kicker CompVT CVT10 Dual 10″ Rhino Sub Box Enclosure & CXA800.1 Amp
This Package Includes the Following Items:
- 1 x Custom Dual 10" Wrangler YJ & TJ 87-06 Enclosure Box
- 2 x Kicker 43CVT104 10-inch Sub CompVT CVT10 400 Watt RMS 4 Ohm SVC Subwoofer
- 1 x Kicker 46CXA8001 Car Audio Class D Amp Mono 1600W Peak Sub Amplifier CXA800.1
- 1 x Harmony Audio HA-AK4 Car Stereo Complete 4 Gauge 1800W Amp Amplifier Install Kit - Nickel
Custom Dual 10" Wrangler YJ & TJ 87-06 Enclosure Box:
Features:- Dual 10" 87-06 Jeep Wrangler YJ & TJ Sub Box
- Mounting Depth: 11-3/4"
- Air Space: 0.85 Cubic Feet Per Sub
- Sealed Enclosure
- Dimensions: Width 33-1/4" x Height 15-1/2 x Top Depth 7-1/4" x Bottom Depth 10-3/4"
- Constructed with High Quality MDF
- (2) High Quality Binding Terminal Cups (Accepts Banana Terminal Plugs OR Bare Wire 'up to 10GA')
- Seven Sprayed on layers for a long lasting, durable, water resistant enclosure (same technology as spray-on bed liner)
- Enclosure is down firing and installs in the rear cargo area
- 1987 - 2006 Jeep Wrangler YJ & TJ
Kicker 43CVT104 10-inch Sub CompVT CVT10 400 Watt RMS 4 Ohm SVC Subwoofer:
Kicker 46CXA8001 Car Audio Class D Amp Mono 1600W Peak Sub Amplifier CXA800.1:
Features
- Efficient Class-D amplifier - 1 Ohm Stable
- Three-second turn-on/off delay to eliminate unwanted interference
- Variable 12dB crossovers provides control to dial in perfect sound
- KickEQ?äó 6dB variable bass boost for those additional low frequencies
- 24dB subsonic filter for protection from potentially damaging frequencies
- FIT+ (Fail-safe Integration Technology-PLUS) means it works with nearly every radio
- Accepts up to 40-volt input signal
- Small footprint for easier installation
- Vertical mounting hardware included for another unique look
Specifications
- Power Handling:
- 600 Watts x 1 @ 2 Ohm RMS
- 1200 Watts x 1 @ 2 Ohm PEAK
- 800 Watts x 1 @ 1 Ohm RMS
- 1600 Watts x 1 @ 1 Ohm PEAK
- Frequency Response: 25Hz - 200Hz
- Signal to Noise Ratio: 95dB
- Input Sensitivity:
- High level 250mV-10V
- Low level 125mV-5V
- Active Crossover: 12dB/octave, variable 50-200Hz, low pass only
- Subsonic Filter: 24dB/octave high-pass fixed @ 25Hz
- Kicker EQ Boost: Variable to +12dB, centered @ 40Hz
- Bass Remote Compatible: CXRC (Not Included)
- Dimensions: 8-1/8" Length x 2-3/8" Height x 7-3/16" Width
Harmony Audio HA-AK4 Car Stereo Complete 4 Gauge 1800W Amp Amplifier Install Kit - Nickel:
Specifications:
- 17FT Flexible Matte Blue 4GA Power Cable
- 3FT Flexible Matte Black 4GA Power Cable
- 20FT Flexible Matte Blue 16GA Speaker Wire
- 17FT Flexible Matte Gray & Black RCA Cable
- 17FT Flexible Matte Blue Remote Wire
- 6FT Split Loom
- ANL Fuse Holder
- 150 Amp ANL Fuse
- (2) 4GA Blue & Black 5/16" Ring Terminals
- (2) 4GA Blue & Black Spade Terminals
- (5) 16GA Blue & Black Spade Terminals
- (4) Pan Head Screws
- (10) Wire Ties


WARNING: This product can expose you to chemicals which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Return Policy
You may return this item in its original condition within 30-Days for a refund, minus a 20% restocking fee, and minus any shipping charges we paid to get the item to you.