(1) Kicker C12 Subwoofer Single 12″ Vent Ported Sub Box Enclosure Bundle with Harmony Audio HA-A400.1 Mono Amplifier
One of the best way to get the maximum bass per watt is a vented enclosure! This single 12" enclosure will work with almost any brand and model subwoofer(s) just be sure to check the recommend airspace required. Unlike a sealed box the vent allows air to freely move in and out of the box but is "tuned" to a set frequency range that greatly increases the overall output. More air = more bass!
Our boxes are made from precision cuts of MDF. They are then liquid nailed, nailed and completely sealed. We then wrap them with high quality carpet that matches most vehicle interiors. All Boxes feature high grade spring loaded terminal cup(s) for the absolute best connection possible. All the custom series enclosures are made to fit precisely into your vehicle to the get the max performance from every extra inch of wasted space.
We guarantee you will not only see a difference in the quality of the boxes we build, but you will hear the difference and that is what is it is truly all about.
The 2016 Comp 12-Inch Subwoofer is a 4-Ohm speaker, made to give you the strong lows you seek every day.
This Comp sub features a thick woofer cone, 360-degree back bracing, a strong motor structure and perimeter venting to ensure you get the strong, reliable bass you need.
The Comp 12-Inch Subwoofer works best with a sealed or ported enclosure and 150 watts of recommended power
Harmony Audio introduces our Alloy series Class D Mono Block amplifier. The Alloy series amplifiers feature some technology and features that you will not find anywhere else including options right out of the box to connect to a factory or aftermarket radio source. The included HA-EASY adapter allows you to easily splice into factory wiring to acquire the audio input signal.
Another common problem with using a factory stereo is finding a switched 12 volt wire to turn the amplifier on and off. Our Alloy Amplifiers feature a solution where the amplifier can be controlled via DC voltage offset or the traditional 12 volt switched remote turn on lead.
Our Alloy amplifiers are also designed for maximum power output! All of the mono block class D amps are 1 Ohm Stable and feature similar power output at a 2 Ohms. This gives you tons of flexibility for woofer options and wiring configurations. The Class D circuitry also keeps the amp running cool with maximum power efficiency. Include a bass remote to allow you to dial in the bass from the comfort of the driver's seat!
This Package Includes the Following Items:
- Harmony Audio HA-A400.1 Car Stereo Class D Amp Mono 800 Watt Subwoofer Amplifier - 1 Ohm Stable - Includes Bass Remote
- 1 x Harmony Audio HA-AK10 Car Stereo Complete 10 Gauge 600W Amp Amplifier Install Kit - Nickel
- 1 x Car Audio Single 12" Vented Subwoofer Stereo Sub Box Ported Enclosure 5/8" MDF
- 1 x Kicker 43C124 12" Comp C12 Series Sub 150W RMS 4 Ohm SVC Car Subwoofer
Harmony Audio HA-400.1 Clas D Mono Amp Specifications:
- Alloy Series Mono - 1 Channel Class D Amplifier
- Power Handling:
- 14.4V @ 1 Ohm
- 400 Watts RMS x 1
- 800 Watts PEAK x 1
- 14.4V @ 2 Ohm
- 300 Watts RMS x 1
- 600 Watts PEAK x 1
- 14.4V @ 1 Ohm
- Frequency Response: 10Hz-180Hz
- Signal to Noise Ratio: 95dB, A-weighted
- RCAs: Input and Full Pass Through Audio Output
- Turn On: DC Offset or 12V Remote
- Recommended External Fuse: 50A
- Recommended Wiring Power Gauge: 4 Gauge
- Dimensions: 9-3/16" Length x 6-1/8" Width x 2" Height
- Input Type: High or Low Level Signal (Selectable Switch)
- High Level Input Sensitivity: 2.5V - 40V
- Low Level Input Sensitivity: 90mV - 10V
- Gain: (Knob Variable)
- Low Pass Filter: 40Hz - 180Hz (Knob Variable)
- Subsonic Filter: 0Hz - 50Hz (Knob Variable)
- Frequency: 30Hz - 80Hz (Knob Variable)
- Bass Boost: 0dB - 12dB @ 50Hz (Knob Variable)
- Includes Remote Bass Control Knob with Power Indicator LED
- Includes HA-EASY Speaker Wire to RCA Adapter to Simplify Installation
- Compatible with both Aftermarket and Factory Source with DC Offset Feature
- When DC Offset Feature is used Remote Terminal becomes a 12V Output to Turn On Another Device
- Brushed Aluminum Case with Light Up Blue LED Harmony Logo
- Power and Protection Lights to Easily See Amp Status
Harmony Audio HA-AK10 Car Stereo Complete 10 Gauge 600W Amp Amplifier Install Kit - Nickel:
Specifications:
- 17FT Flexible Matte Blue 10GA Power Cable
- 3FT Flexible Matte Black 10GA Power Cable
- 20FT Flexible Matte Blue 16GA Speaker Wire
- 17FT Flexible Matte Gray & Black RCA Cable
- 17FT Flexible Matte Blue Remote Wire
- 6FT Split Loom
- Mini ANL Fuse Holder
- 60 Amp Mini ANL Fuse
- (2) 10GA Blue & Black 5/16" Ring Terminals
- (2) 10GA Blue & Black Spade Terminals
- (5) 16GA Blue & Black Spade Terminals
- (4) Pan Head Screws
- (10) Wire Ties
Car Audio Single 12" Vented Subwoofer Stereo Sub Box Ported Enclosure 5/8" MDF:
Features:
- Single 12" Vented Sub Box
- Mounting Depth: 15-1/4"
- Air Space: 1.60 Cubic Feet
- Vented Enclosure
- Dimensions: Width 18-1/4" x Height 13-1/4" x Depth 16-1/4"
- Vented Enclosure allows maximum output
- Constructed with High Quality MDF
- High Quality Binding Terminal Cup (Accepts Banana Terminal Plugs OR Bare Wire 'up to 10GA')
- High Quality Gray Carpet
Kicker 43C124 12" Comp C12 Series Sub 150W RMS 4 Ohm SVC Car Subwoofer:
- Size: 12"
- Impedance: 4 Ohms SVC
- Power Watts: 300W Peak / 150W RMS
- Sensitivity: 88.3 dB
- Freq. Response: 27-500 Hz
- Mounting Depth: 5-7/8"
- Mounting Diameter: 11"
WARNING: This product can expose you to chemicals including DEHP which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Return Policy
You may return this item in its original condition within 30-Days for a refund, minus a 20% restocking fee, and minus any shipping charges we paid to get the item to you.
