SoundGate PowerStage PWRA407 Kicker Car Audio Upgrade Powered Subwoofer System for Select 2007-10 Jeep Wrangler

Upgrade your Factory Audio System
This Soundgate Powerstage system upgrade by Kicker will transform your stock radio and speakers into a high-fidelity sound system capable of giving a full, accurate, and richly-textured musical pleasure! And it does it without changing the look of your vehicle's interior or dash.

Made for your Jeep Wrangler Vehicle
The heart of the system is the Powerstage processor/amp module that plugs in between your car's stock receiver and speakers with the help of a vehicle-specific wiring harness. Kicker's technicians measured the acoustics of your vehicle's interior, then developed a program to get the strongest and cleanest audio performance possible from the stock speakers. The Powerstage module breathes new life into your vehicle's factory system, automatically correcting for the limitations of the factory speakers, then adding plenty of power so the speakers can sound their best.

Kicker's Powered Subwoofer
It wouldn't be a sonic upgrade without a subwoofer to bring bass magic to the mix. Kicker includes a custom-fit, powered subwoofer that mounts on the back of the left rear seat. A 200-watt Amplifier provides the power you need to feel the bass from the 10" sub in the front seat.

This Soundgate™ Powerstage™ System by Kicker upgrade package comes with all the hardware and brackets you'll need, and all the wiring is pre-cut and terminated to help make the installation easier. Step-by-step, illustrated instructions make this sonic upgrade a fun and rewarding project. Kindly identify your vehicle's year, make & model, before purchasing to make sure it'll work with this package, or you can call one of our car audio experts at 1-877-ASK-HIFI.
 

Overview: Kicker's SoundGate PowerStage factory audio upgrade kits are designed to fit in specific year/make/model vehicles. The PWRA407 is compatible with select 2007-2010 4-door Jeep Wranglers with basic 4-Speaker Factory System. Included with this system is a squared 10-Inch subwoofer speaker in a custom enclosure, sub amp, multi-channel amp with custom mounting brackets, all the necessary cables to power both amplifiers, and adapter plugs to connect to the factory radio and speakers without cutting into any of the factory wiring.

Multi-Channel Amplifier: The multi-channel amplifier is rated at 50 watts RMS x 4 channels and powers the front and rear factory speakers. The amp also has a built-in computer-optimized, 32-bit DSP (Digital Signal Processor) programmed specifically for the Jeep's interior and factory audio system. Custom brackets are bolted to the amp to mount it out of sight. The included wiring harness has adapter plugs that connect between the factory radio and factory harness, so cutting/splicing/testing the existing wires is not necessary. The included power harness is connected to an accessory lug in the engine compartment, and specific wire routing instructions are included.

Subwoofer: The single 10" square Kicker subwoofer is loaded in a custom enclosure and powered by the included 200-watt amplifier. The included wiring harness has adapter plugs that connect to the multi-channel amp's harness (for subwoofer signal input) and the power cable is connected to the accessory lug in the engine compartment. Specific wire routing instructions are included. The subwoofer is mounted behind the rear seat.

Electrical System: Both amplifiers are designed to have minimum impact on the Jeep's charging system.