Kicker 44L7S124 Car Audio Solo-Baric 12 Subwoofer Square L7 Dual 4 Ohm Includes Harmony HA-A800.1 Mono Amplifier
The KICKER Solo-Baric L7S handles tons of power and heat without distortion or compromising on sound quality.
The Solo-Baric revolves around KICKER's most advanced cone design, the injection-molded SoloKon. The 360-degree, constant-contact back bracing adheres directly to every contour of the square cone, adding targeted strength, reliable performance and accurate response for the super-clean bass you’ve been looking for.
Includes Harmony Audio HA-A800.1 Car Stereo Class D Amp Mono Channel 1600 Watt Subwoofer Amplifier - 1 Ohm Stable - Includes Bass Remote
Kicker KIC17-44L7S124 12" Subwoofer:
- Injection-Molded Polypropylene Cone
- Patented Corner Ribs Minimize Distortion
- SoloKon 360-Degree Back Bracing
- Ribbed Santoprene Surround With Blue Surround Stitching
- UniPlate Black Plate And Pole Piece, Plus Perimeter Venting For Excellent Thermal Management
- Thick Tinsel Leads
- Large Ceramic Magnet
- Cast Aluminum Basket
- Satin-Nickel Plated, Spring-Loaded Speaker Terminals
- Power Handling
- 750 Watts RMS
- 1500 Watts Peak
- Impedance: Dual 4 Ohm
- Sensitivity: 88.6 dB
- Frequency Response: 20-100 Hz
- Mounting Depth: 6-11/16"
- Mounting Cutout: 11-1/16"
Sub Box Recommendations:
- Minimum Sealed: 0.88 Cubic Feet
- Maximum Sealed: 2.0 Cubic Feet
- Minimum Vented: 1.75 Cubic Feet
- Maximum Sealed: 3.25 Cubic Feet
Harmony Audio HA-A800.1 Mono Amplifier Specifications:
- Alloy Series Mono - 1 Channel Class D Amplifier
- Power Handling:
- 14.4V @ 1 Ohm
- 800 Watts RMS x 1
- 1600 Watts PEAK x 1
- 14.4V @ 2 Ohm
- 600 Watts RMS x 1
- 1200 Watts PEAK x 1
- 14.4V @ 1 Ohm
- Frequency Response: 10Hz-180Hz
- Signal to Noise Ratio: 95dB, A-weighted
- RCAs: Input and Full Pass Through Audio Output
- Turn On: DC Offset or 12V Remote
- Recommended External Fuse: 100A
- Recommended Wiring Power Gauge: 1/0 Gauge
- Dimensions: 12-3/8" Length x 6-1/8" Width x 2" Height
- Input Type: High or Low Level Signal (Selectable Switch)
- High Level Input Sensitivity: 2.5V - 40V
- Low Level Input Sensitivity: 90mV - 10V
- Gain: (Knob Variable)
- Low Pass Filter: 40Hz - 180Hz (Knob Variable)
- Subsonic Filter: 0Hz - 50Hz (Knob Variable)
- Frequency: 30Hz - 80Hz (Knob Variable)
- Bass Boost: 0dB - 12dB @ 50Hz (Knob Variable)
Features:
- Includes Remote Bass Control Knob with Power Indicator LED
- Includes HA-EASY Speaker Wire to RCA Adapter to Simplify Installation
- Compatible with both Aftermarket and Factory Source with DC Offset Feature
- When DC Offset Feature is used Remote Terminal becomes a 12V Output to Turn On Another Device
- Brushed Aluminum Case with Light Up Blue LED Harmony Logo
- Power and Protection Lights to Easily See Amp Status
WARNING: This product can expose you to chemicals including Diisononyl phthalate which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Return Policy
You may return this item in its original condition within 30-Days for a refund, minus a 20% restocking fee, and minus any shipping charges we paid to get the item to you.