Harmony Audio HA-C102 10″ 2000W Subwoofers (2) Bundle with Vented Sub Box & CXA18001 Amp
This car audio subwoofer pack has exactly what you need to have an amazing car stereo! Subwoofers come professionally installed in a high quality subwoofer enclosure and are ready to be installed in your car right out of the box. No more going shop to shop looking for all the parts you need. Get everything you need in one place at one amazing price!
This package includes:
- 2 x Harmony Audio HA-C102 Carbon Series 10" Subwoofers
- 1 x Dual 10" Vented Sub Box Enclosure
- 1 x Kicker CXA1800.1 Refurbished Car Audio Subwoofer Amplifier
- 1 x Harmony Audio HA-AK4 Car Stereo Complete Install Kit
Subwoofer Specifications:
- Power Handling:
- Peak: 2000 watts
- RMS: 1000 watts
- Sensitivity: 85.7dB
- Frequency Response: 45Hz-300Hz
- Mounting Depth: 6-5/8"
- Mounting Cutout Diameter: 9-5/16"
- Min Sealed Box Volume (Cubic Feet): 0.99
- Max Sealed Box Volume (Cubic Feet): 1.94
- Min Vented Box Volume (Cubic Feet): 1.4
- Max Vented Box Volume (Cubic Feet): 2.47
- Magnet Weight: 202 Ounces
- 2.5" Copper Voice Coil
- Dual 2 Ohm
- Fiber Lightweight Cone
- Stitched High Roll Foam Surround
- Tinsel Leads Woven into Spider
- Die-Cast Aluminum Basket
- High Flux Ferrite Magnet
- Voice Coil Diameter: 65.5mm
- Voice Coil Height: 50mm
- HE Magnetic Gap Height: 15mm
- Voice Coil Bobbin: Black Aluminum
- Xmax: 17.5mm
- Magnet Layers: 4
- Cms (Suspension Compliance): 0.108
- Qms (Mechanical Q Factor): 4.3
- Qes (Electrical Q Factor): 0.52
- Qts (Total Q Factor): 0.5
- Mms (Moving Mass): 211.4
- Vas (Equivalent Volume of Compliance): 10.3 L
- Rs (Resonant Frequency): 45 Hz
- SD (Effective Piston Area): 363.05 cm2
Enclosure Specifications:
- Mounting Depth: 13-3/4"
- Air Space: 1.22 Cubic Feet Per Sub
- Ported Enclosure
- Dimensions: Width 32" x Height 12-1/4" x Depth 14-1/2"
- Constructed with a 1" MDF Front & 3/4" Sides
- High Quality Binding Terminal Cup (Accepts Banana Terminal Plugs OR Bare Wire 'up to 10GA')
- High Quality Gray Carpet
Amplifier Specifications:
- Class-D 2-Ohm Stable Monoblock Amplifier
- RMS Power Rating:
- 4 ohms: 900 watts x 1 chan.
- 2 ohms: 1800 watts x 1 chan.
- Total power output: 3600 watts
- Pulse Width Modulated MOSFET power supply
- Kicker CXARC wired remote bass level control available and sold separately
- LED power (green) and protect (red) indicators
- Soft start turn-on
- Mono channel operation
- Speaker-level (high-level) inputs via RCA
- Requires Kicker KISL, available and sold separately
- Preamp RCA outputs to daisy chain multiple amps
- 3-way protection circuitry (thermal, overload, and speaker short protection)
- Dual speaker terminals simplify the hookup of multiple speakers
- Input sensitivity:
- Low level: 125mV-5V
- High level: 250mV-10V
- Frequency Response: 25 - 200Hz
- Signal to Noise Ration: >95dB
- Variable Low-Pass Crossover: 50 - 200Hz 12dB/octave
- Variable Bass Boost: 0 to +12 dB bass boost at 40 Hz
- Fixed Subsonic Filter @ 25hz, 24db/octave
- 1/0 gauge power and ground wiring is recommended for installation
- Dimensions: 7-3/16"W x 13-5/8"L x 2-3/8"H
- This item is Factory Certified Refurbished
Installation Kit Specifications:
- 17FT Flexible Matte Blue 4GA Power Cable
- 3FT Flexible Matte Black 4GA Power Cable
- 20FT Flexible Matte Blue 16GA Speaker Wire
- 17FT Flexible Matte Gray & Black RCA Cable
- 17FT Flexible Matte Blue Remote Wire
- 6FT Split Loom
- ANL Fuse Holder
- 150 Amp ANL Fuse
- (2) 4GA Blue & Black 5/16" Ring Terminals
- (2) 4GA Blue & Black Spade Terminals
- (5) 16GA Blue & Black Spade Terminals
- (4) Pan Head Screws
- (10) Wire Ties
WARNING: This product can expose you to chemicals which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Return Policy
You may return this item in its original condition within 60-Days for a refund, minus a 20% restocking fee, and minus any shipping charges we paid to get the item to you.
