Alpine S2-A60M Car Type S Class D Subwoofer 1200W Amplifier & 0GA Amp Kit New
This Package Includes the Following Items:
- 1 x Alpine S2-A60M Car Audio Type S Series Amp Class D Subwoofer 1200W Amplifier
- 1 x Harmony Audio HA-AK0 Car Stereo Complete 1/0 Gauge 3000W Amp Amplifier Install Kit - Nickel
- 1 x Harmony Audio HA-BT1 Car Audio Battery Terminal Pair (2) 8GA & Ring Terminal New
- 1 x Harmony Audio HA-RT0 Car Stereo Power or Ground 1/0 Gauge 5/16" Ring Terminal - Nickel
Alpine S2-A60M Car Audio Type S Series Amp Class D Subwoofer 1200W Amplifier:
- Alpine S-Series Mono Power Amplifier - S2-A60M
- Power Output:
- 400W RMS x 1 (4ohm, 14.4V < 1% THD+N)
- 600W RMS x 1 (2ohm, 14.4V < 1% THD+N)
- S/N ratio: >85dB (ref: 1W into 4 ohm), >105dB (ref: rated power into 4 ohm)
- Remote bass knob compatible (requires RUX-KNOB.2, sold separately)
- THD+N ≤ 0.03% (ref 1W info 4 ohm)
- Frequency Response: 10HZ-400Hz (+/- 3 dB)
- Damping Factor: > 1000
- Improved heat sink and protection circuit design that eliminates thermal shut-down, for dependable music playback
- Approximate Weight: 11 lbs
- Dimensions: 8???º??æ W x 8???º??æ H x 2.25???º??æ D
- RMS Power @ 4 ohms: 400 watts x 1 channels
- RMS Power @ 2 ohms: 600 watts x 1 channels
- Peak Power @ 4 ohm: 800 watts x 1 channels
- Peak Power @ 2 ohms: 1200 watts x 1 channels
- Amplifier Series: S Series
- Amplifier Class: D
- Number of Channels: 1 - Mono
- Total Peak Power Output: 1200 watts
- Total RMS Power Output: 600 watts
- Minimum Impedance Unbridged: 2 ohms
- THD at Rated RMS Power: <1%%
- Bass/Gain Remote: Optional (Accessory required and sold separately)
- NOTE: This product can only ship to addresses within the USA and it's territories
Harmony Audio HA-AK0 Car Stereo Complete 1/0 Gauge 3000W Amp Amplifier Install Kit - Nickel:
Specifications:
- 17FT Flexible Matte Blue 1/0GA Power Cable
- 3FT Flexible Matte Black 1/0GA Power Cable
- 20FT Flexible Matte Blue 16GA Speaker Wire
- 17FT Flexible Matte Gray & Black RCA Cable
- 17FT Flexible Matte Blue Remote Wire
- 6FT Split Loom
- ANL Fuse Holder
- 250 Amp ANL Fuse
- (2) 1/0GA Blue & Black 5/16" Ring Terminals
- (2) 1/0GA Blue & Black Spade Terminals
- (5) 16GA Blue & Black Spade Terminals
- (4) Pan Head Screws
- (10) Wire Ties
Harmony Audio HA-BT1 Car Audio Battery Terminal Pair (2) 8GA & Ring Terminal New:
Specifications:
- Battery Terminal Pair Includes Positive & Negative
- (2) 8 Gauge Outputs
- (1) Ring Terminal Post
- Nickel Plated Finish
- Hex Set Screw ensures Tight Connection
- Universal - Accepts Any Brand Power Wire
- Ultra Conductive
- Terminals Marked with + & - Symbols
- Corrosion Resistant
Harmony Audio HA-RT0 Car Stereo Power or Ground 1/0 Gauge 5/16" Ring Terminal - Nickel:
Specifications:
- 1/0 Gauge Ring Terminal
- Nickel Plated Finish
- Ideal for Power or Ground Cable
- 5/16" Hole Diameter
- Set Screw ensures Tight Connection
- Ultra Conductive
WARNING: This product can expose you to chemicals which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Return Policy
You may return this item in its original condition within 14-Days for a refund, minus a 20% restocking fee, and minus any shipping charges we paid to get the item to you.
