Compatible with 1997-2004 Chevy Corvette Coupe C5 Z06 Harmony A122 Single 12″ Sub Box & CXA800.1
This Package Includes the Following Items:
- 1 x 1997-2004 Chevy Corvette C5 & Z06 Custom Single 12" Hatch Subwoofer Enclosure Sub Box
- 1 x Harmony Audio HA-A122 Car Stereo Alloy Series 12" Sub 1000W Dual 2 Ohm Subwoofer
- 1 x Kicker 46CXA8001 Car Audio Class D Amp Mono 1600W Peak Sub Amplifier CXA800.1
- 1 x Harmony Audio HA-AK4 Car Stereo Complete 4 Gauge 1800W Amp Amplifier Install Kit - Nickel
1997-2004 Chevy Corvette C5 & Z06 Custom Single 12" Hatch Subwoofer Enclosure Sub Box:
Features:- 1997-2004 Chevy Corvette C5 & Z06 Custom Single 12" Hatch Subwoofer Enclosure
- Air Space: 1.03 Cubic Feet per Sub
- Mounting Depth: 7-1/16""
- Sealed Enclosure
- Dimensions: (Top Plate - 26" Width x 25-1/2" Depth) x 8-1/2" Height
- Constructed with High Quality MDF
- High Quality Spring Loaded Terminal Cups (Bare Wire 'up to 10GA')
- High Quality Black Carpet
- Sub fires up greatly increasing bass output
- Enclosure installs in rear cubby recessed area in hatch
- 1997-2004 Chevy Corvette C5 & Z06
Harmony Audio HA-A122 Car Stereo Alloy Series 12" Sub 1000W Dual 2 Ohm Subwoofer:
Specifications:
- 12" Alloy Series Car Subwoofer
- Power Handling:
- Peak: 1000 watts
- RMS: 500 watts
- Sensitivity: 87dB
- Frequency Response: 25Hz-500Hz
- Mounting Depth: 6"
- Mounting Cutout Diameter: 11 1/8"
- Min Sealed Box Volume (Cubic Feet): 1.65
- Max Sealed Box Volume (Cubic Feet): 3.72
- Min Vented Box Volume (Cubic Feet): 2.02
- Max Vented Box Volume (Cubic Feet): 2.72
- Dual 2 Ohm
Features:
- Aluminum Alloy Lightweight Cone
- Butyl Rubber Surround
- Tinsel Leads Woven into Spider
- 2" Copper Voice Coil
- Steel Basket
- Ferrite Magnet
- Aluminum Former Material
Kicker 46CXA8001 Car Audio Class D Amp Mono 1600W Peak Sub Amplifier CXA800.1:
Features
- Efficient Class-D amplifier - 1 Ohm Stable
- Three-second turn-on/off delay to eliminate unwanted interference
- Variable 12dB crossovers provides control to dial in perfect sound
- KickEQ?äó 6dB variable bass boost for those additional low frequencies
- 24dB subsonic filter for protection from potentially damaging frequencies
- FIT+ (Fail-safe Integration Technology-PLUS) means it works with nearly every radio
- Accepts up to 40-volt input signal
- Small footprint for easier installation
- Vertical mounting hardware included for another unique look
Specifications
- Power Handling:
- 600 Watts x 1 @ 2 Ohm RMS
- 1200 Watts x 1 @ 2 Ohm PEAK
- 800 Watts x 1 @ 1 Ohm RMS
- 1600 Watts x 1 @ 1 Ohm PEAK
- Frequency Response: 25Hz - 200Hz
- Signal to Noise Ratio: 95dB
- Input Sensitivity:
- High level 250mV-10V
- Low level 125mV-5V
- Active Crossover: 12dB/octave, variable 50-200Hz, low pass only
- Subsonic Filter: 24dB/octave high-pass fixed @ 25Hz
- Kicker EQ Boost: Variable to +12dB, centered @ 40Hz
- Bass Remote Compatible: CXRC (Not Included)
- Dimensions: 8-1/8" Length x 2-3/8" Height x 7-3/16" Width
Harmony Audio HA-AK4 Car Stereo Complete 4 Gauge 1800W Amp Amplifier Install Kit - Nickel:
Specifications:
- 17FT Flexible Matte Blue 4GA Power Cable
- 3FT Flexible Matte Black 4GA Power Cable
- 20FT Flexible Matte Blue 16GA Speaker Wire
- 17FT Flexible Matte Gray & Black RCA Cable
- 17FT Flexible Matte Blue Remote Wire
- 6FT Split Loom
- ANL Fuse Holder
- 150 Amp ANL Fuse
- (2) 4GA Blue & Black 5/16" Ring Terminals
- (2) 4GA Blue & Black Spade Terminals
- (5) 16GA Blue & Black Spade Terminals
- (4) Pan Head Screws
- (10) Wire Ties


WARNING: This product can expose you to chemicals which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Return Policy
You may return this item in its original condition within 30-Days for a refund, minus a 20% restocking fee, and minus any shipping charges we paid to get the item to you.