Elation ENODE 4 Ethernet Node with 4 DMX512 Outlets for Artnet & sACN Protocols (ENO406)
The eNode4 is an Ethernet node that serves four DMX512 outlets, compatible with the Artnet and sACN protocols. All 4 outlets conform to DMX512-A and can be used as input or output. The two Ethernet links on the rear are 10/100BaseTX connections on Neutrik RJ45 Ethercon connectors. The eNode4 embeds a built-in switch fabric which allows you to use the converter as an Ethernet repeater. All configuration are done through the on-board display and push dial. The eNode4 can be set on a flat surface or mounted to a truss structure using the quick lock omega bracket, which is included.
- Elation ENODE 4 Ethernet Node with 4 DMX512 Outlets for Artnet & sACN Protocols (ENO406)
- SKU: ADJ14-ENODE 4
- Features:
- DMX routing, universe setting
- Input and output enable / disable
- DMX output frame rate setting
- Supported protocols: DMX, DMX512-A, RDM, Art-Net™, sACN
- Protocol selection per port
- IP settings
- Unit ID and labeling
- Ethernet activity indication on front panel
- Multi language support
- Operation:
- Ethernet <-> DMX conversion
- Ethernet and DMX Merger
- Ethernet and DMX Backup
- DMX splitter / booster
- DMX trigger. Remote selection of the control source
- Built-in DMX soft-patch
- DMX Features:
- Supported Protocols: DMX512 (1986 & 1990), DMX512-A, RDM ANSI E1.20
- DMX Port Direction: Input or output (configurable)
- DMX Port Isolation: Optic and galvanic isolation per port
- DMX Port Termination/Biasing: Yes
- DMX Timing: Frame rate: 10-40fps / Break: 176-352µs
- Ethernet Features:
- Supported Protocols: Art-Net™, sACN ANSI E1.31
- Port Speed: 10/100BaseTX
- Port Sensing: Auto-negociation, MDI/MDIX
- Size / Weight:
- Length: 255mm
- Width: 173mm
- Vertical Height: 43mm
- Weight: 1.6kg
- Electrical / Thermal:
- AC 100-240V - 50/60Hz
- 5W Max Power Consumption
- 2°C to 45°C
- This item is New
Return Policy
You may return this item in its original condition within 14-Days for a refund, minus a 20% restocking fee, and minus any shipping charges we paid to get the item to you.
The eNode4 is an Ethernet node that serves four DMX512 outlets, compatible with the Artnet and sACN protocols. All 4 outlets conform to DMX512-A and can be used as input or output. The two Ethernet links on the rear are 10/100BaseTX connections on Neutrik RJ45 Ethercon connectors. The eNode4 embeds a built-in switch fabric which allows you to use the converter as an Ethernet repeater. All configuration are done through the on-board display and push dial. The eNode4 can be set on a flat surface or mounted to a truss structure using the quick lock omega bracket, which is included.
- Elation ENODE 4 Ethernet Node with 4 DMX512 Outlets for Artnet & sACN Protocols (ENO406)
- SKU: ADJ14-ENODE 4
- Features:
- DMX routing, universe setting
- Input and output enable / disable
- DMX output frame rate setting
- Supported protocols: DMX, DMX512-A, RDM, Art-Net™, sACN
- Protocol selection per port
- IP settings
- Unit ID and labeling
- Ethernet activity indication on front panel
- Multi language support
- Operation:
- Ethernet <-> DMX conversion
- Ethernet and DMX Merger
- Ethernet and DMX Backup
- DMX splitter / booster
- DMX trigger. Remote selection of the control source
- Built-in DMX soft-patch
- DMX Features:
- Supported Protocols: DMX512 (1986 & 1990), DMX512-A, RDM ANSI E1.20
- DMX Port Direction: Input or output (configurable)
- DMX Port Isolation: Optic and galvanic isolation per port
- DMX Port Termination/Biasing: Yes
- DMX Timing: Frame rate: 10-40fps / Break: 176-352µs
- Ethernet Features:
- Supported Protocols: Art-Net™, sACN ANSI E1.31
- Port Speed: 10/100BaseTX
- Port Sensing: Auto-negociation, MDI/MDIX
- Size / Weight:
- Length: 255mm
- Width: 173mm
- Vertical Height: 43mm
- Weight: 1.6kg
- Electrical / Thermal:
- AC 100-240V - 50/60Hz
- 5W Max Power Consumption
- 2°C to 45°C
- This item is New
Return Policy
You may return this item in its original condition within 14-Days for a refund, minus a 20% restocking fee, and minus any shipping charges we paid to get the item to you.